Shijiazhuang Longwei Pump Co., Ltd.
Main products:LWA Slurry Pump,XZ Gravel Pump,S.SH Double Suction Water Pump,D Type Multistage Water Pump,HJRB Single-stage Centrifuge Pump
Products
Contact Us
  • Contact Person : Mr. Chen Roger
  • Company Name : Shijiazhuang Longwei Pump Co., Ltd.
  • Tel : 86-311-86080398
  • Fax : 86-311-86660298
  • Address : Hebei,shijiazhuang,No. 1902 Block A, BinJiang International Building, XiuMen Street, Qiao Dong District, Shi Jia Zhang City
  • Country/Region : China
  • Zip : 050000

Anti-corrosion rubber pump parts

Anti-corrosion rubber pump parts
Product Detailed
Wearable pump parts Convey corrosive slurry Impeller centrifugal pump Advanced performance Long lifespan,low cost

Anti-corrosion rubber pump parts  

LWA,HH pumps are used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. in the industries of metallurgy, mining, coal, power, building material and etc.

The temperature of the pumped solid-liquid mixture should be ≤80oC, and the weight concentration should be ≤60.

Typical applications are:

Chemical process Heavy minerals Paper and pulp Mill discharge Sugar beet Slag granulation Cyclone feed Power utilities

Features:

• Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.• Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints.• Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.• Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.• Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.• One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

 

Anti-corrosion rubber pump parts



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.